PRODUCT OVERVIEW

HS23P1820 is 8-bit MCU manufactured by low-power and high-speed CMOS process. It has built-in 1k*14 bit ROM and 64Byte SRAM, including three 12 bit PWM and configurable port comparator module.

FEATURES

◆ 42 RISC instructions, except that the jump instruction is two cycles, all instructions are single cycle

◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack

◆ Support GOTO instruction full ROM jump, support full ROM subroutine call

◆ 1K×14 program memory

◆ 64 x 8 bit universal register

◆ Direct and indirect addressing

◆ 8 bit real-time clock with 1 programmable predivider (TC0)

◆ 12 bit real-time clock with 1 programmable predivider (TP0)

◆ Configurable port comparator resources

◆ Internal power reset circuit (POR), built-in undervoltage reset (BOR)

◆ Power-on reset timer (PWRT) and oscillator start timer (OST)

◆ Watchdog timer(WDT) with high reliability of internal crystal, enabled or disabled by software

◆ one group of I/O ports can be configured with pull-up, pull-down, and leak-open states

◆ 4 working modes can be switched at will: normal mode, low speed mode, sleep mode and green mode

◆ Wake up sleep: INT/INT1 pin interrupt, IOB input state change, TC0 overflow wake up, COMP wake up

◆ Wake up green: INT/INT1 pin interrupt, IOB input state change, TC0, TP0 overflow wake up, COMP wake up Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: internal high speed oscillator, internal low speed oscillator, external low speed crystal oscillator

◆ 6 kinds of interrupts available: TC0 overflow interrupt, IOB port change interrupt, INT/INT1 interrupt, TP0 overflow interrupt, interrupts for comp comparisons

◆ Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW                  

HS23P1800 is 8-bit MCU with low power consumption, high speed, high noise tolerance and OTP program memory. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P1800 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, 3-channel PWM outputs, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P1800 can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.

FEATURES

◆ 42 RISC instructions, all instructions are single cycle, except program branch instructions are two cycles

◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack

◆ GOTO/CALL instruction load 10-bit PC address directly

◆ 1K×14 program memory

◆ 65 x 8 bit general-purpose register

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ Two 8-bit real-time clocks/counters of 8-bit programmable prescaler (Timer0)

◆ 3 PWM outputs, 1 BUZ Internal power reset circuit (POR), built-in low voltage detection

◆ Power-on reset (POR), low voltage detection (LVD)and brown-out reset(BOR)

◆ Watchdog timer (WDT) with high reliability of internal crystal,enabled or disabled by software

◆ One group of I/O ports IOB adopts independent command control and can be configured with pull-up, pull-down and open-drain states

◆ Wake up sleep: INT pin or port B input state changes to wake up 

◆ Power saving sleep mode, programmable code protection

◆ IRC: internal high speed RC oscillator 

◆ Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW

HS2300-P is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS2300-P includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt,

sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS2300-P can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.

FEATURES

◆ 42 RISC instructions

◆ All instructions are single cycle except program branch instructions which are two cycles

◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack 

◆ Support GOTO instruction full ROM jump Support full ROM subroutine call

◆ 1K×14 program memory

◆ 65 x 8 bit universal register

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) 

◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) 

◆ Power on reset timer (PWRT) and oscillator start timer (OST) 

◆ Watchdog timer (WDT) with high reliability of internal crystal,enabled or disabled by software

◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states

◆ Wake up sleep: INT pin or port B input state changes to wake up sleep Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: ERC: external RC oscillator

                IRC: internal RC oscillator

                ERIC: External resistor internal capacitor oscillator

                LF: low speed crystal oscillator

                HF: High speed crystal oscillator

◆ Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW  

HS23P10 is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P10 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P10 can access 2K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.

FEATURES

◆ 42 RISC instructions

◆ All instructions are single cycle except program branch instructions which are two cycles

◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack 

◆ Support GOTO instruction full ROM jump Support full ROM subroutine call

◆ 2K×14 program memory

◆ 65 x 8 bit universal register

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) 

◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) 

◆ Power on reset timer (PWRT) and oscillator start timer (OST) 

◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software

◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states

◆Wake up sleep: INT pin or port B input state changes to wake up sleep

◆Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: ERC: external RC oscillator

                IRC: internal RC oscillator

                ERIC: External resistor internal capacitor oscillator

                LF: low speed crystal oscillator

                HF: High speed crystal oscillator

◆Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW  

HS2300-PE is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS2300-PE includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS2300-PE can access 1K×13 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.

FEATURES

◆ 42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle

◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack

◆ Support GOTO instruction full ROM jump, support full ROM subroutine call

◆ 1K×13 bit program memory

◆ 65 x 8 bit universal register Mixer block 256 x 8 EEPROM

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0)

◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR)

◆ Power on reset timer (PWRT) and oscillator start timer (OST)

◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software

◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states

◆ Wake up sleep: INT pin or port B input state changes to wake up sleep

◆ Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: ERC: external RC oscillator

                IRC: internal RC oscillator

                ERIC: External resistor internal capacitor oscillator

                LF: low speed crystal oscillator

                HF: High speed crystal oscillator

◆ Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW

HS23P2002 is 8-bit MCU with low power consumption, high speed, high noise tolerance and OTP program memory. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P2002 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, 3-channel PWM outputs, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P2002 can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers..

FEATURES

◆42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle

◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack

◆ Support GOTO instruction full ROM jump, support full ROM subroutine call

◆ 2K×13 bit program memory

◆ 64 x 8 bit universal register Mixer block 256 x 8 EEPROM

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0)

◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) Power on reset timer (PWRT) and oscillator start timer (OST)

◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software

◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states

◆ Wake up sleep: INT pin or port B input state changes to wake up sleep Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: ERC: external RC oscillator

                IRC: internal RC oscillator

                ERIC: External resistor internal capacitor oscillator

                LF: low speed crystal oscillator

                HF: High speed crystal oscillator

◆ Wide operating voltage range: 2.2V to 5.5V

PRODUCT OVERVIEW

HS23P2022 is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS.RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P2022 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset,independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P2022 can access 2K×13 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers..

FEATURES

◆ 42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle

◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack

◆ Support GOTO instruction full ROM jump, support full ROM subroutine call

◆ 2K×13 bit program memory

◆ 64 x 8 bit universal register

◆ 256 x 8 bit EEPROM

◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle

◆ Direct and indirect addressing

◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0)

◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR)

◆ Power on reset timer (PWRT) and oscillator start timer (OST)

◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software

◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states

◆ Wake up sleep: INT pin or port B input state changes to wake up sleep

◆ Energy-saving sleep mode, programmable code protection

◆ Optional oscillator options: ERC: external RC oscillator

                IRC: internal RC oscillator

                ERIC: External resistor internal capacitor oscillator

                LF: low speed crystal oscillator

                HF: High speed crystal oscillator

◆ Wide operating voltage range: 2.2V to 5.5V