Products
PRODUCT12BIT ADC OTP
| Part No. | IRC | VDD | ILRC | ROM | RAM | I/O | TIMER | STACK | ADC | PWM | E2 | Package | |||||||||||||||||||||||||||||||||||||
| HS26P10 | 16MHz | 2.2~5.0V | 32K | 2K*16 | 128 | 6/12/14 /16/18 |
2*8bit 1*16bit | 8 | (5+1)*12bit | 3*8bit | - | SOP8/SOP14 /SOP16/SOP18 /SOP20/DIP8 /DIP14/DIP16 /DIP18/DIP20 /TSSOP20 |
|||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEW：HS26P10 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include 2K*16 bit OTP-ROM on-chip. FEATURES：◆ Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles. ◆ 2K*16 ROM on-chip. ◆ Direct and indirect addressing. ◆ Three 8-bit timer/counter: TC0：external event counter/PWM0/ Buzzer output. TC1：external event counter/PWM1/ Buzzer output. TC2：external event counter/PWM2/ Buzzer output. ◆ Built-in POR, BOR. ◆ Built-in power on reset time (PWRT) and oscillator start-up time (OSCT). ◆ Built-in watch-dog (WDT). ◆ Four oscillation modes Built-in IHRC 16MHz Built-in ILRC 32KHz. External high-speed crystal oscillator 4MHz~16MHz. External low-speed crystal oscillator 32.768KHz. ◆ ONE safety bit in code-register protect program not be read. ◆ 128*8 bit SRAM ◆ Three sets of standard Bi-directional I/O ports. ◆ 8 levels stack buffer ◆ 6 interrupt sources 4 internal interrupts：TC0, TC1, TC2, ADC. 2 external interrupts：INT0, INT1 ◆ ADC Five external ADC input One internal battery measurement Internal AD reference voltage(VDD、4V、3V、2V). More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS26P10E | 16MHz | 2.2~5.0V | 32K | 2K*16 | 128 | 6/14/16 | 2*8bit 1*16bit | 8 | (5+1)*12bit | 3*8bit | 256*8 | SOP8/SOP16 /SOP20 |
|||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEW：HS26P10E product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include 2K*16 bit OTP-ROM on-chip. FEATURES ：◆ Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles. ◆ 2K*16 ROM on-chip. ◆ Built in 256*8-bit EEPROM. ◆ Direct and indirect addressing. ◆ Three 8-bit timer/counter: TC0：external event counter/PWM0/ Buzzer output. TC1：external event counter/PWM1/ Buzzer output. TC2：external event counter/PWM2/ Buzzer output. ◆ Built-in POR, BOR. ◆ Built-in power on reset time (PWRT) and oscillator start-up time (OSCT). ◆ Built-in watch-dog (WDT). ◆ Four oscillation modes Built-in IHRC 16MHz Built-in ILRC 32KHz. External high-speed crystal oscillator 4MHz~16MHz. External low-speed crystal oscillator 32.768KHz. ◆ ONE safety bit in code-register protect program not be read. ◆ 128*8 bit SRAM ◆ Three sets of standard Bi-directional I/O ports. ◆ 8 levels stack buffer ◆ 6 interrupt sources 4 internal interrupts：TC0, TC1, TC2, ADC. 2 external interrupts：INT0, INT1 ◆ ADC Five external ADC input One internal battery measurement Internal AD reference voltage(VDD、4V、3V、2V). More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P2721 | 16MHz | 2.2~5.0V | 32K | 2K*16 | 96 | 6/8/12 | 4*8bit | 5 | (5+1)*12bit | 4*8bit | - | SOP8/MSOP10/ESSOP10/SOP14 | |||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEW：HS23P2721 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12 bit ADC and 2K*16 bit EPROM on-chip. FEATURES：◆ Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycle. ◆ 2K*16 ROM on-chip ◆ Direct and indirect addressing ◆ Four 8-bit timer/counter: TC0：external event counter/PWM0/ Buzzer output. TC1：external event counter/PWM1/ Buzzer output. TC2：external event counter/PWM2/ Buzzer output. TC3：external event counter/PWM3(PWM duty cycle configurable 1/256) ◆ Built-in POR, BOR. ◆ Built-in power on reset time (PWRT) and oscillator start-up time (OSCT). ◆ Built-in watch-dog (WDT). ◆ Two oscillation modes Built-in IHRC 16MHz Built-in ILRC 32KHz. ◆ ONE safety bit in code-register protect program not be read. ◆ 96*8 bit SRAM ◆ Three sets of standard Bi-directional I/O ports. ◆ 5 levels stack buffer ◆ 7 interrupt sources 5 internal interrupts：TC0, TC1, TC2, TC3, ADC. 2 external interrupts：INT0, INT1 ◆ ADC Five external ADC input One internal battery measurement Internal AD reference voltage（VDD、4V、3V、2V） Built-in adjustable oscillator (IRC 16MHz).The maximum frequency can be configured as 24MHZ, and the frequency can be adjusted by register software.
More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P2710 | 16MHz | 2.2~5.0V | 32K | 1K*16 | 96 | 4/6 | 4*8bit | 5 | (3+1)*12bit | 4*8bit | - | SOT23-6/SOP8 | |||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEW：HS23P2710 product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12 bit ADC and 1K*16 bit EPROM on-chip. FEATURES：Most of instruction are one cycle only. Except JMP/CALL instruction, They are two cycles. 1K*16 EPROM on-chip. Direct and indirect addressing. Four 8-bit timer/counter: TC0：PWM0/ Buzzer output. TC1：PWM1/ Buzzer output. TC2：PWM2/ Buzzer output. TC3：PWM3(PWM duty cycle configurable 1/256). Built-in POR, BOR. Built-in power on reset time (PWRT) and oscillator start-up time (OSCT). Built-in watch-dog (WDT). Two oscillation modes Built-in IHRC 16MHz. Built-in ILRC 32KHz. ONE safety bit in code-register protect program not be read. 96*8 bit SRAM. Three sets of standard Bi-directional I/O ports. 5 levels stack buffer. 5 internal interrupts：TC0, TC1, TC2, TC3, ADC. ADC Three external ADC input One internal battery measurement Internal AD reference voltage(VDD、4V、3V、2V). Built-in adjustable oscillator (IRC 16MHz).The maximum frequency can be configured as 24MHZ, and the frequency can be adjusted by register software. More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P2710E | 16MHz | 2.2~5.0V | 32K | 1K*16 | 96 | 6 | 4*8bit | 5 | (3+1)*12bit | 4*8bit | 256*8 | SOP8 | |||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEW：HS23P2710E product is 8-bit micro-controller by CMOS process of low power-consumption and high speed which include a 12-bit ADC,a 1K*16-bit EPROM and a 256Byte EEPROM. FEATURES：Most of instruction are one cycle only. Except JMP/CALL instruction,They are two cycle. 1K*16 ROM on-chip. 256Byte EEPROM. Direct and indirect addressing. Four 8-bit timer/counter: TC0：PWM0/ Buzzer output. TC1：PWM1/ Buzze routput. TC2：PWM2/ Buzzer output. TC3：PWM3 (PWM duty cycle configurable 1/256). Built-in POR,BOR. Built-in power on reset time (PWRT） and oscillator start-up time (OSCT). Built-in watch-dog (WDT). Two modes of oscillation: n Built-in IHRC 16MHz. n Built-in ILRC 32KHz. ONE safety bit in code-register protect program not be read. 96*8 bit SRAM. Three sets of standard Bi-directional I/O interfaces. 5 levels stack buffer. 5 interrupt sources: TC0、TC1、TC2、TC3、ADC. ADC: Three external ADC input. One internal battery measurement. Internal AD reference voltage (VDD、4V、3V、2V). Built-in adjustable oscillator (IRC 16MHz）.The maximum frequency can be configured as 24MHZ,and the frequency can be adjusted by register software. More |
|||||||||||||||||||||||||||||||||||||||||||||||||
